Honda HRN216 Series Manual page 170

HRN216
2. SMART DRIVE CONTROL
REMOVAL
1. Fully loosen the Smart Drive cable adjuster
2. Remove the four 4 mm self-tapping screws and the upper and lower clutch grips.
3. Carefully remove the multi-position adjuster and spring.
4. Unsnap and remove the upper and lower bracket covers.
5. Remove the 5 x 37 mm roller pin, the four 4 mm self-tapping screws, and the upper and lower grip brackets
(the flywheel brake lever and cable
are shown removed for clarity.)
LOWER GRIP BRACKET
LOWER BRACKET COVER
LOWER CLUTCH GRIP
4 mm SELF-TAPPING SCREW (8)
HANDLEBAR
(P. 3-10).
UPPER BRACKET COVER
UPPER GRIP BRACKET
HANDLEBAR/ CABLES/CONTROLS
UPPER CLUTCH GRIP
5 x 37 mm
ROLLER PIN
SMART DRIVE CABLE
REMOVAL/
INSTALLATION:
MULTI-POSITION
ADJUSTER
SPRING
P. 11-16
11-13