Blade Removal And Installation - Honda HRJ216K2 Manual

BLADE REMOVAL AND INSTALLATION

If you remove the blade, use a torque wrench to reinstall. Wear heavy
gloves to protect your hands. To avoid weakening the blade, or
causing imbalance or poor cutting, the blade should be sharpened by
trained staff at an authorized Honda servicing dealer. If replacing the
blade, use a Honda genuine replacement blade or equivalent.
Removal:
1. Turn the fuel valve to the OFF
position.
2. Disconnect the spark plug cap,
then tilt the mower to the right
side, so the carburetor side is up.
3. Hold the blade disc firmly, and
remove the blade disc holder bolt.
Set a flat blade screwdriver at the
engine's bolt to prevent the blade
disc from turning when removing
the blade disc holder bolt.
BLADE DISC HOLDER BOLT
56
BLADE DISC
ENGINE'S
BOLT
FLAT BLADE
SCREWDRIVER
BLADE DISC'S
HOLE