ADTRAN 5000 Series Command Reference Manual page 213

Command Reference Guide
Functional Notes
The link state ID differs depending on whether the link state advertisement in question describes a network
or a router.
If describing a network, this ID is one of the following:
• The network's IP address. This is true for type 3 summary link advertisements and in autonomous
system external link advertisements.
• An address obtained from the link state ID. If the network link advertisement's link state ID is masked
with the network's subnet mask, this will yield the network's IP address.
If describing a router, this ID is always the router's OSPF router ID.
Usage Examples
>enable
#show ip ospf database
61200990L1-35E Copyright © 2005 ADTRAN
Enable Mode Command Set
213