Data Format - ADInstruments AD2817C Operation Manual

AD2817C Operation Manual

5.2.5 Data format

AD2817C outputs the measurement results using the ASCII via the GPIB bus. The Format 1
MeasDisplay
is used by
List Sweep
used by
The <DATA A>, <DATA B>, and <BIN> formats are as follows.
<DATA A> and <DATA B> format:
z
The data output formats for <DATA A> (primary parameter's measurement data), and
<DATA B> (secondary parameter's measurement data) uses the 12 ASCII character fixed
length format as follows.
SN.NNNNNESNN
(S: +/-, N: 0 to 9, E: Exponent Sign)
<BIN> Format:
z
The <BIN No.> data shows the bin sorting results as follows.
The <BIN No.> data is output with the measurement data only when the comparator
function is set to ON.
BinNo. Disp
page,
page. The two formats are described respectively as follows.
Figure 5-4 Data format 1
Data
1
2
3
4
5
Bin Count
page and
Sorting Results
BIN 1
BIN 2
BIN 3
AUX_BIN
OUT_OF_BINS
50
page, while Format 2 is