So,Hello - Circutor Wallbox eNext Series Installation Manual

Wallbox eNext
So, hello!
This manual provides commissioning information about Wallbox eNext series,
which has been designed and tested to allow electric vehicle charging according
to IEC 61851-1:2017.
This document has different sections such as step-by-step installation procedure
and technical data.
THE FOLLOWING SYMBOLS ARE USED FOR IMPORTANT
SAFETY INFORMATION IN THIS DOCUMENT
ELECTRIC RISK
Necessary precautions shall be taken to prevent any electrical risk
while the operations are carried out within the unit.
Unit must be disconnected from any power source during
commissioning.
ATTENTION!
Indicates that the damage to property can occur if appropriate
precautions are not taken
• Complies with IEC 61851, Electric vehicle conductive charging
system (IEC 61851-1:2017 and IEC 61851-21-2:2018).
• Complies with IEC 62196, Plugs, socket-outlets, vehicle couplers
and vehicle inlets (IEC 62196-1 and IEC 62196-2).
• Directives: 2014/35/UE, LVD;2014/30/UE, EMC.
• RFID complies with ISO/IEC 14443A/B
• Modem 4G complies with CE/RED
Depending on the model, compliance with some standards may vary
(1)
Installation guide
(1)
(1)
7