Emerson Rosemount 702 Reference Manual page 90

Wireless discrete transmitter for plunger arrival

Hide thumbs Also See for Rosemount 702:

Table of Contents

Appendix B specifications and reference data

Unwind coaxial cable and connect the cable to both the antenna and the lightning

protector connected to the transmitter, leaving one loop minimum for a drip loop.

Ensure the drip loop is lower than the device, allowing water to flow away from the

device.

Figure 9-4:

Create a Drip Loop

Apply the coaxial sealant around each of the coaxial connections and at the lightning

arrestor, making sure the RF connections are completely sealed.

702 Wireless Discrete Transmitter

Table of Contents

Troubleshooting