Physical Installation - Emerson Rosemount 702 Reference Manual

Wireless discrete transmitter for plunger arrival
Hide thumbs Also See for Rosemount 702:
Table of Contents

Advertisement

Installation
3.2

Physical installation

Choosing an installation location and position
When choosing an installation location and position, consider access to the Rosemount
702 Transmitter for ease of power module replacement. For best performance, the
antenna should be vertical with space between objects in a parallel metal plane, such as a
pipe or metal framework, as the pipes or framework may adversely affect the antenna's
performance.
Refer to wireless best practices and
Installing the transmitter
The transmitter is designed to use the B4 Universal Mounting Bracket. This curved,
stainless steel bracket includes a U-bolt and fasteners for mounting the transmitter to a 2-
in. pipe or pole. The B4 bracket attaches directly to the Transmitter. The B4 bracket may
also be used to in other mounting configurations such as mounting the transmitter to a
wall or a panel. For installation of the ETC cyclops sensor, please follow their specific
guidelines noted in the installation manual
Required equipment
Other required equipment (not included)
LCD display
If an LCD display is ordered, it will be shipped attached to the transmitter.
The optional LCD display can be rotated in 90-degree increments by squeezing the two
tabs, pulling out, rotating and snapping back into place.
If the LCD pins are inadvertently removed from the interface board, carefully re-insert the
pins before snapping the LCD display back into place.
If the LCD pins are inadvertently removed from the interface board, carefully re-insert the
pins before snapping the LCD display back into place.
Note
Only use Rosemount Wireless LCD part number: 00753-9004-0002.
38
Mounting Kit (part number 03151-9270-0003)
-
One bolt, 3/8-1 x 1-1/2
-
One lock washer
Strap wrench for battery cover removal and installation
9/16-in. combination wrench or adjustable wrench
#2 Phillips screwdriver
Shielded cable (minimum 3-wire)
Cable glands
Wireless System Engineering
702 Wireless Discrete Transmitter
Guide.

Advertisement

Table of Contents
loading

Table of Contents