Front Panel Leds - BEC MX-221P Quick Start Manual

Triple-sim 4g/lte router
Table of Contents

Advertisement

Front Panel LEDs

LED
Power
Ethernet Port
LAN 1 - 2
LTE
(Received Signal
Strength
Indicator)
Internet
STATUS
Green
System is up and ready
Red
Boot failure
Green
Transmission speed is at Gigabit speed (1000Mbps)
Orange
Transmission speed is at 10/100Mbps
Blinking
Data being transmitted/received
Green
RSSI greater than -69 dBm. Excellent signal condition
Green
Flashing
RSSI from -81 to -69 dBm. Good signal condition
quickly
Orange
Flashing
RSSI from -99 to -81 dBm. Fair signal condition
quickly
Orange
Flashing
RSSI less than -99 dBm. Poor signal condition
slowly
Orange
No signal. The cellular module is in service
Off
No LTE module or LTE module fails
Green &
MX-221P is either in debug mode or in upgrading firmware process
Orange
Green
IP address has received, and traffic is passing thru the device
Red
IP address request has failed
MX-221P is either in bridged mode or WAN connection is not ready
Off
DESCRIPTION
Quick Start Guide
2

Advertisement

Table of Contents
loading

Table of Contents