Device Description; Front Panel Leds - BEC 6200WZL Series User Manual

Device Description

Front Panel LEDs

LED
Power
Ethernet Port
LAN 1 ~ 4
EWAN on LAN 4
Wireless
WPS
3G/4G
(Received Signal
Strength Indicator)
Internet
BEC 6200WZL User Manual
STATUS DESCRIPTION
System is up and ready
Green
Red Boot failure
Green LAN Port is connected to an Ethernet unit, e.g. PC, Notebook, Xbox
Blinking Data being transmitted/received
Note: port #4 can be configured as WAN port for broadband connectivity
BEC 6200WZL is successfully connected with a broadband connection
Green
device.
Blinking Data being transmitted/received
Green Wireless connection established
Blinking Data being transmitted / received
Green Wireless client has been connected via WPS successfully
Blinking WPS is enabled and ready for other wireless clients to join
Green RSSI greater than -69 dBm. Excellent signal condition
Green
RSSI from -81 to -69 dBm. Good signal condition
Flashing quickly
Orange
RSSI from -99 to -81 dBm. Fair signal condition.
Flashing quickly
Orange
RSSI less than -99 dBm. Poor signal condition.
Flashing slowly
Orange No signal and the 4G_LTE module is in service
Off No LTE module or LTE module fails
Green WAN IP received and traffic is passing thru the device.
Red WAN IP request failed.
BEC 6200WZL is either in bridged mode or WAN connection not ready.
Off
Product Overview 12