Nokia Beacon 6 Product Manual page 70

Configure a Beacon 6 (HA-0336W-B)
Table 19
Field
IPv6 LAN Host Configuration
DNS Server
Prefix Config
Prefix
Interface
DHCPv6 Server Pool
DHCP Start IP Address
DHCP End IP Address
(1 of 2)
Field
Whether the address info
through DCHP
Whether other info obtained
through DHCP
Maximum interval for
periodic RA messages
Minimum interval for periodic
RA messages
(2 of 2)
2 Choose a DNS server, Prefix Config, and Interface.
3 Enter the DHCP configuration information.
4 Enter the maximum and minimum intervals for RA messages.
5 Click Save/Apply.
6 STOP. This procedure is complete.
70
LAN IPv6 network parameters
Description
Choose a DNS server from the drop-down menu
Choose
WANConnection (prefix will be obtained from the WAN) or Static (enables you
to enter the prefix).
This field appears if you selected the "Static" option for the "prefix config" field.
Type a connection.
This field appears if you selected the Wan Connection option for the "prefix
config" field. Choose a WAN connection interface from the drop-down menu.
Enter the starting DHCP IP address
Enter the ending DHCP IP address
Description
Select this checkbox to enable address information retrieval through DHCP
Select this checkbox to enable retrieval of other information through DHCP
Enter the maximum interval (in seconds) for periodic Router Advertisement
messages. The interval range is from 4 to 1800.
Enter the minimum interval (in seconds) for periodic Router Advertisement
messages. The interval range is from 4 to 1800.
3FE-47429-AAAA-TCZZA
a prefix config option
Nokia WiFi Beacon 6 Product Guide
from the drop-down menu, either
Issue: 01