Nokia Beacon 6 Product Manual page 35

Nokia WiFi Beacon 6 Product Guide
Issue: 01
•
Tri-band Wifi6: concurrent IEEE 802.11b/g/n/ax 2x3 2.4 GHz, 802.11 a/n/ac/ax
2x2 5.2 GHz, and 802.11 a/n/ac/ax 4x4 5.8 GHz
•
Automatically decide on wireless router mode and beacon mode in a mesh
network
•
Three 10/100/1000Base-T interface with RJ-45 connectors
•
One USB 3.1(gen1)
•
Nokia intelligent Easy Mesh
•
Embedded edge analytics optimize network performance in real-time
•
UPnP IGD1.0 support
•
DLNA
Benefits:
•
OFDMA and MU-MIMO are multiuser technologies that enable simultaneous
bidirectional communication between an access point (AP) and end users.
While MU-MIMO increases capacity and efficiency in high-bandwidth
applications like mission-critical voice calls and video streaming, OFDMA is
ideal for low-bandwidth, small-packet applications such as IoT sensors.
•
PHY rate up to 574 Mb/s for 2.4 GHz, 1200 M b/s for low 5 GHz, and 2400 Mb/s
for High 5 GHz
•
Improves connection speeds throughout the home and provides Wi-Fi where
typically there would be none.
•
Better Mesh performance by using dedicate 4x4 5G radio for Wi-Fi backhaul
•
Seamless roaming (IEEE 802.11k and 802.11v)
•
Client steering, channel optimization
•
Real-time wireless spectrum scan and analysis
•
High quality of service (QoS) video over Wi-Fi
•
Ease of setup and user intuitive information
Table 6 lists additional function detail.
Table 6 Beacon 6 (HA-0336G-A) function detail
Function Detail
Installation Desk mounted
3FE-47429-AAAA-TCZZA
Beacon 6 (HA-0336W-B) unit data sheet
35