Nokia Beacon 6 Product Manual page 63

Nokia WiFi Beacon 6 Product Guide
WAN connection list Drop-down menu listing all WAN connections. The connection selected is the
connection for which WAN status will be shown.
Enable/Disable Select this checkbox to enable the WAN connection
VLAN VLAN ID
WAN Link Status Whether the WAN link is up or down
Ethernet Link Status Whether the link is up or down
Tx Packets Number of packets transmitted on the WAN connection
Rx Packets Number of packets received on the WAN connection
Tx Dropped Number of packets dropped on the transmit WAN connection
Rx Dropped Number of packets dropped on the receive WAN connection
Err Packets Number of errored packets on the WAN connection
2 Click Refresh to update the displayed information.
3 STOP. This procedure is complete.
Procedure 11
1 Select Status > Home Networking from the top-level menu in the Ethernet Gateway window, as
shown in Figure 20.
Issue: 01
Home networking information retrieval
3FE-47429-AAAA-TCZZA
Configure a Beacon 6 (HA-0336W-B)
63