Figure 10 Beacon 6 (Ha-0336G-A) - Nokia Beacon 6 Product Manual

1 Power down the unit by using the on/off power switch. See Figure
the Beacon 6 (HA-0336G-A).
Figure 10
Replace a Beacon 6 (HA-0336G-A)
Beacon 6 (HA-0336G-A) connections
ON/OFF RESET WPS
LAN 1 LAN 2
WAN LAN 3
POWER
2 Disconnect the WAN, Ethernet, and power cables from the Beacon 6 (HA-
0336G-A); see Figure
(HA-0336G-A).
3 Replace the Beacon 6 (HA-0336G-A) with the new device. The device
can be placed on any flat surface, such as a desk or shelf.
4 Connect the Ethernet cables directly to the RJ-45 ports; see Figure
the location of the RJ-45 ports.
5 Connect the WAN cable directly to the RJ-45 port; see Figure
location of the RJ-45 WAN port.
6 Connect the power cable to the power connector.
3FE-47429-AAAA-TCZZA
Nokia WiFi Beacon 6 Product Guide
ON/OFF RESET WPS
LAN 1 LAN 2
WAN LAN 3
POWER
10 for the connector locations on the Beacon 6
10 for the connections on
28231
10
10 for the
Issue: 01
for