Ansi Beacon 6 Safety Guidelines; Safety Instructions; Safety Instruction Boxes In Customer Documentation - Nokia Beacon 6 Product Manual

ANSI CPE safety guidelines
2 ANSI BEACON 6 safety
guidelines
This chapter provides information about the mandatory regulations that govern the
installation and operation of devices in the North American or ANSI market.

2.1 Safety instructions

This section describes the safety instructions that are provided in the BEACON 6
customer documentation and on the equipment.
2.1.1 Safety instruction boxes in customer
documentation
The safety instruction boxes are provided in the BEACON 6 customer
documentation. Observe the instructions to meet safety requirements.
The following is an example of the Danger box.
The Danger box indicates that the described activity or situation may pose a threat
to personal safety. It calls attention to a situation or procedure which, if not
correctly performed or adhered to, may result in death or serious physical harm.
Do not proceed beyond a Danger box until the indicated conditions are fully
understood and met.
The following is an example of the Warning box.
The Warning box indicates that the described activity or situation may, or will,
cause equipment damage, loss of data, or serious performance problems. It
identifies a possible equipment-damaging situation or provides essential
information to avoid the degradation of system operations or data.
6
Possibility of personal injury.
Danger —
Possibility of equipment damage.
Warning 1 —
Possibility of data loss.
Warning 2 —
3FE-47429-AAAA-TCZZA
Nokia WiFi Beacon 6 Product Guide
Issue: 01