Nokia Beacon 6 Product Manual page 95

Nokia WiFi Beacon 6 Product Guide
Field
MAC Filter Mode
LAN Port
MAC Address
WiFi SSID
MAC Filter Mode
SSID Select
Enable
MAC Address
(2 of 2)
2 Configure a MAC filter for the Ethernet interface.
3 Click Save.
4 If desired, select a MAC address and click the Delete column to delete a MAC address.
5 Click Refresh to update the information.
6 Configure a MAC filter for WiFi SSID (WLAN MAC filter).
7 Click Save.
8 STOP. This procedure is complete.
Procedure 27
Issue: 01
1
Description
Choose the MAC filter mode from this drop-down menu: Blocked or Allowed
Select the checkboxes for the LAN ports
Choose a MAC address from the drop-down menu or enter the address in the text field
Choose the MAC filter mode from this drop-down menu: Blocked or Allowed
Choose an SSID option from the drop-down menu
Select this checkbox to enable MAC filtering for WiFi SSID
Choose a MAC address from the drop-down menu or enter the address in the text field
IP filter configuration
Select Security > IP filter from the top-level menu in the Ethernet Gateway window, as
shown in Figure 39.
3FE-47429-AAAA-TCZZA
Configure a Beacon 6 (HA-0336W-B)
95