Safety Standards Compliance; Emc, Emi, And Esd Standards Compliance - Nokia Beacon 6 Product Manual

ANSI CPE safety guidelines
Figure 1

2.2 Safety standards compliance

This section describes the BEACON 6 compliance with North American safety
standards.
2.2.1

EMC, EMI, and ESD standards compliance

The Beacon 6 complies with the following requirements:
•
Federal Communications Commission (FCC) CFR 47, Part 15, Subpart B,
Class B requirements for equipment
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
8
Beacon 6 safety label
Changes or modifications to this unit not
Warning —
expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
3FE-47429-AAAA-TCZZA
Nokia WiFi Beacon 6 Product Guide
Issue: 01