Configure a Beacon 6 (HA-0336W-B)
Figure 39
Table 32
Field
Enable IP Filter
Mode
Internal Client
Local IP Address
Source Subnet Mask
Remote IP Address
Destination Subnet Mask
(1 of 2)
Field
Protocol
96
IP filter window
Table
32
describes the fields in the IP filter window.
IP filter parameters
Description
Select this checkbox to enable an IP filter
Choose an IP filter mode from the drop-down menu:
•
•
Choose an internal client from the drop-down menu:
•
•
Local IP address
Source subnet mask
Remote IP address
Destination subnet mask
Description
Choose an application protocol or all from the drop-down menu
3FE-47429-AAAA-TCZZA
Drop for upstream
Drop for downstream
Customer setting—uses the IP address input below
IP—uses the connecting IP address of the device input below
Nokia WiFi Beacon 6 Product Guide
Issue: 01