Nokia WiFi Beacon 6 Product Guide
Static DHCP
MAC Address
IPv4 Address
2
Configure the LAN.
3
Click Save.
4
Bind a MAC address to the LAN by entering the MAC and IP addresses in the Static DHCP Entry fields and then
clicking Add. Repeat for all MAC addresses to be bound.
Procedure 14
1
Select Network > LAN_IPv6 from the top-level menu in the Ethernet Gateway window, as shown
in Figure 23.
Issue: 01
Hexadecimal MAC address to associate to the LAN
IP address to associate to the bound MAC address
LAN IPv6 networking configuration
Figure 23
LAN IPv6 network window
Table
19
describes the fields in the LAN IPv6 network window.
3FE-47429-AAAA-TCZZA
Configure a Beacon 6 (HA-0336W-B)
69