Fcc Radiation Exposure Statement; Resistibility Requirements Compliance - Nokia Beacon 6 Product Manual

ANSI CPE safety guidelines
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
2.2.4

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF Rules.
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 26cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter. End-
users and installers must be provided with antenna installation instructions and
consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1 this device may not cause harmful interference, and
2 this device must accept any interference received, including interference that
may cause undesired operation.
2.2.5

Resistibility requirements compliance

The Beacon 6 complies with the requirements of ITU Recommendation K.21 for
resistibility of telecommunication equipment installed in customer premises to
overvoltage and overcurrents.
0
Any changes or modifications not expressly
Caution —
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
3FE-47429-AAAA-TCZZA
Nokia WiFi Beacon 6 Product Guide
Issue: 01