Figure 9
Install a Beacon 6 (HA-0336G-A)
Beacon 6 (HA-0336G-A) connections
3
Connect the Ethernet cables to the RJ-45 ports; see Figure
location of the RJ-45 ports.
4
Connect the WAN cable to the RJ-45 WAN port; see Figure
location of the RJ-45 WAN port.
connector.
•
Units must be powered by a Listed or CE approved and marked
limited power source power supply with a minimum output rate of
12 V dc, 2 A. The polarity of the power adapter plug must match
the Beacon 6 (HA-0336G-A).
6
Power up the unit by using the On/Off power switch.
3FE-47429-AAAA-TCZZA
Nokia WiFi Beacon 6 Product Guide
5 Connect the power cable to the power
Note —
Observe the following:
28231
9
for the
9
for the
Issue: 01