Figure 42 Dmz And Alg Window; Table 35 Dmz And Alg Parameters - Nokia Beacon 6 Product Manual

Nokia WiFi Beacon 6 Product Guide
5 Click Save DMZ.
6 STOP. This procedure is complete.
Issue: 01
Figure 42 DMZ and ALG window
Table 35 describes the fields in the DMZ and ALG window.
Table 35 DMZ and ALG parameters
Field
ALG Config
DMZ Config
WAN Connection List
Enable DMZ
DMZ IP Address
2 Configure ALG.
3 Click Save ALG.
Configure DMZ.
4
3FE-47429-AAAA-TCZZA
Description
Select the checkboxes to enable the protocols to be supported by the ALG: FTP,
TFTP, SIP, H323, RTSP, L2TP, IPSEC, PPTP
Choose a WAN connection from the drop-down menu
Select this checkbox to enable DMZ on the chosen WAN connection
Choose Customer Setting and enter the DMZ IP address or choose the IP
address of a connected device from the drop-down menu
Configure a Beacon 6 (HA-0336W-B)
101