Measuring In Body Mode; To Measure A Another Person’s Body Temperature - Microlife NC200 User Manual

4.2. Measuring in body mode

To measure a another person's body temperature:
1. Press the START/IO button. When activated,
the display will briefly show all symbols.
2. When the device is ready, «°C»/«°F» will flash,
a blinking blue tracking light will appear, and
the thermometer will beep.
3. Hold the thermometer about 2 inches
away, and aim it at the center of the
forehead (5 cm). If the area is covered with
hair, sweat or dirt, please remove the obstacle
to improve the reading's accuracy.
4. When the measuring sensor is an appropriate
distance, the device will automatically start the
measurement.
The blue light will stop blinking and remain
steady, the display will show a countdown (3,
2, 1); after 3 seconds a long beep will verify the
completion of measurement.
5. Read the recorded temperature from the LCD
display.
body
measuring
mode
15