Care And Maintainance; Replacing The Battery - Microlife NC200 User Manual

7. Care and maintainance

To clean your thermometer's casing and measuring probe, use
an alcohol swab or cotton tissue moistened with alcohol (70%
Isopropyl). Ensure that no liquid enters the interior of the
thermometer. Take care not to scratch the surface of the probe
lens and the display.
Note:
• Never use abrasive cleaning agents, thinners or benzene for
cleaning
• Never immerse the instrument in water or other cleaning
liquids.
• Do not store the unit under direct sunlight, at a high
temperature, or in high humidity or dust. Performance may
be degraded.

8. Replacing the battery

This instrument is supplied with 2 new, long-life
1.5V, AAA batteries. Batteries need replacing when
the battery icon is displayed alone. Remove the
battery cover by sliding it in the direction shown.
Replace all batteries at the same time with new
batteries, ensure correct polarity as shown by the
symbols in the compartment, and replace the
battery cover.
Never open the thermometer. This voids the
manufacturer's warranty.
20