Equipment & Specifications; Attention Owner/Operator - Schulte SMR-800 Operator's Manual

EQUIPMENT & SPECIFICATIONS
Weight (approximate)
Drum Width
Drum Speed
Tires
Transport Width
Hydraulic Flow Range
(Motor Options will change based on Skid Steer and desired RPM)
OPTIONS:
Mount Options: Standard Mount or Floating Mount, Joystick Control for New Holland, Case, John Deere & Cat.
Optional Broom attachment for sweeping parking lots, roads or removing snow
Hydraulic Requirements - Skid Steer Units
Minimum
Recommended

Attention Owner/Operator

BEFORE OPERATING THIS MACHINE:
1. Carefully read the Operator's Manual, completely understand the Safety Messages and instructions, and
know how to operate correctly both the Skid Steer and Implement.
2. Fill out the Warranty Card in full. Be sure to answer all questions, including the Serial Number of the
Implement. Mail within 30 days of delivery date of this implement.
NOTE: Warranties are honored only if completed "Owner Registration and Warranty" forms are received by
Schulte within thirty days of delivery of the implement.
3. Record the Windrower Model and Serial Numbers on the Warranty page at the front of the Operator's
Manual. Keep this as part of the permanent maintenance file for the Implement.
SMR-800 04/19
© 2019 Alamo Group Inc.
INTRODUCTION
SMR-800
1900 lbs (862 kg)
7' 6"
100 - 250 RPM rpm (Based on Hydraulic motor)
23" Forklift (58 mm)
102" (2.59 m)
18-38 gpm (68 lpm - 144 lpm)
16 GPM
20 GPM
Introduction Section 2-3