Electric Harness Kit - Schulte SMR-800 Operator's Manual

ELECTRIC HARNESS KIT

Refer to the Electrical Components Hydraulic Block section of the Parts Manual
1. Attach the female solenoid plugs on the
Electrical Harness
corresponding solenoids on the Valve Block
(127-032).
2. Route the 6-pin plug end of the harness up
through the cut-out in the shield. Connect the
plug end to the plug end on the skid steer.
3. Secure harness to the main hydraulic hoses
with cable ties.
SMR-800 04/19
© 2019 Alamo Group Inc.
ASSEMBLY
(277-009) to the
Assembly Section 3-6