Table of Contents
Advertisement
Never work under the Implement, the framework, or any lifted
component unless the Implement is securely supported or blocked up
to prevent sudden or inadvertent falling which could cause serious
injury or even death.
Relieve hydraulic pressure prior to doing any maintenance or repair work
on the Implement.
blocked up, disengage the PTO, and turn off the tractor engine. Push
and pull the Remote Cylinder lever in and out several times prior to
starting any maintenance or repair work.
11. WINDROWER STORAGE
Properly preparing and storing the windrower is critical to maintaining its appearance and to help ensure years
of dependable service. The following are suggested storage procedures:
1. Thoroughly clean all debris off the implement to
prevent damage from standing water.
2. Lubricate all implements points as detailed in
the maintenance section.
3. Tighten all bolts and pins to the recommended
torque.
4. Check the implement for worn and damaged
parts. Perform repairs and make replacements
immediately so that the implement will be ready
for use at the start of the next season.
5. Store the implement in a clean, dry place with
the implement resting securely on blocks or at
ground level.
6. Keep the hydraulic hoses from sitting in water,
dirt and other contaminants.
7. Use spray touch-up enamel where necessary
to prevent rust and maintain the appearance of
the implement.
Never allow children to play on or around Tractor or Implement. Children can slip or fall off
the Equipment and be injured or killed. Inadvertent contact with controls can cause the
Implement to shift or fall crushing themselves or others.
SMR-800 04/19
© 2019 Alamo Group Inc.
OPERATION
(SG-14)
Place the Implement on the ground or securely
(S3PT-09)
Operation Section 4-22
(SG-25)
Advertisement
Table of Contents
