Standard Equipment & Specifications; Operator Requirements - Schulte SRW1000 Operator's Manual

Pivoting rock windrower
Table of Contents

Advertisement

STANDARD EQUIPMENT & SPECIFICATIONS
1.
General Data
Weight (approx.)
Working Width
Working Length
Drum Width
Drum Angle
Drum Speed
Power Requirement
Maximum Ground Speed
Tractor PTO Speed

2. OPERATOR REQUIREMENTS

Safe operation of the unit is the responsibility of a qualified operator. A qualified operator has read and
understands the implement and tractor Operator's Manuals and is experienced in implement and tractor
operation and all associated safety practices. In addition to the safety messages contained in this manual,
safety signs are affixed to the implement and tractor. If any part of the operation and safe use of this
equipment is not completely understood, consult an authorized dealer for a complete explanation.
If the operator cannot read the manuals for themselves or does not completely understand the operation of the
equipment, it is the responsibility of the supervisor to read and explain the manuals, safety practices, and
operating instructions to the operator.
Safe operation of equipment requires that the operator wear approved Personal Protective Equipment (PPE)
for the job conditions when attaching, operating, servicing, and repairing the equipment. PPE is designed to
provide operator protection and includes the following safety wear:
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Always Wear Safety Glasses
Hard Hat
Steel Toe Safety Footwear
Gloves
Hearing Protection
Close Fitting Clothing
Respirator
or
Filter
operating conditions) OPS-U- 0002
SRW1000 08/17
© 2017 Alamo Group Inc.
OPERATION
SRW 1000 Pivoting Rock Windrower
2,625 lbs. (1,190 kg)
148 in. (3,760 mm)
180 in. (4,572 mm)
10 ft. (3,048 mm)
18 Degrees
150 RPM
40-80 HP (30-60 kW)
5 mph (8 km/h)
540 RPM
Mask
(depends
on
Operation Section 4-3

Advertisement

Table of Contents
loading

Table of Contents