Strainer; Shut-Off & Fill Valve; Agitation Valve (Hydraulic Pump Units Only); Optional Ground Driven Pump - J&M NitroGro 5010 Operator's Manual

Hide thumbs Also See for NitroGro 5010:
Table of Contents

Advertisement

The NitroGro applicator is equipped with a strainer designed to remove dirt and debris from the fertilizer
to prevent downstream clogs.
The NitroGro applicator is standard equipped with a 2" shut-off and fill valve. There is an
upgrade option for a 3" shut-off and fill valve. The 3" valve will allow a quicker fill.
If priming becomes an issue the agitation valve may be opened to allow air to
escape from the pump so it can be primed.
The agitation valve can also be used to evenly mix additives by running the
pump with the electronic control valves closed.
With PWM, the agitation valve may be closed during operation for full pump
efficiency.
The John-Blue ground drive pump comes in either
single or double piston configuration. It does not
require any control valves. The rate is controlled
by an adjustment on the pump and it naturally
compensates for different speeds since it is driven
off of the main frame wheel.
12
Shut-Off & Fill Valve

Agitation Valve (Hydraulic Pump Units Only)

Optional Ground Driven Pump

Strainer

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nitrogro 5016Nitro-gro 5010

Table of Contents