Appendix G - Warranty; Intended Use For The Model 5100E - Bacharach Neutronics 5100E Operation Manual

Appendices
5.7 APPENDIX G – Warranty
Neutronics warrants to the original purchaser, that the Model 5100E Oxygen analyzer is free from defects
in material and workmanship for a period of one (1) year from the date of shipment from Neutronics or
from one of Neutronics' authorized dealers. Our liability will be limited to the repair or replacement, at our
factory, of parts found to be defective within the warranty period, as determined by Neutronics. The parts
will be repaired or replaced free of charge if shipped prepaid to the factory in the original shipping carton.
This warranty is void if the product has been subject to misuse or abuse, including but not limited to:
exposure to water, humidity, temperature, shock or pressure outside of the listed specifications, or has not
been operated or installed in accordance with operating and maintenance instructions, for repairs which
were not performed by Neutronics or by one of its authorized dealers, or if the identifying markings on the
product label have been altered or removed.
The seller assumes no liability for consequential damages of any kind, and the buyer, by acceptance
through purchase of this product, will assume all liability for the consequences of its use or misuse by the
buyer, his employees, or others.
Neutronics reserves the right to use any materials in the manufacture, repair or service of the products and
to modify the design as deemed suitable, in so far as these materials or modifications maintain the stated
warranty.
It is the sole responsibility of the buyer / user to determine if this product is suitable for the intended
application.
THESE WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, OR IMPLIED
INCLUDING WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE.

Intended Use for the Model 5100E

The Model 5100E Oxygen analyzer was designed to provide the trained operator with useful information
relating to the concentration of Oxygen. This information may be used in process control or to minimize
possible hazardous conditions, which may be present in various processes. Before implementation, the
user must fully understand the operation and limitations of this instrument as well as the application for its
use. The responsibility for the proper application, operation, installation, and maintenance of the Model
5100E Oxygen analyzer is the sole obligation of the trained operator. The purchaser is required to ensure
operators are properly trained in the use of this unit as well as in the possible hazards associated with its
use or with the intended application. The purchaser must ensure that all of the proper warnings, labels,
instruction manuals, lock outs, redundant components, hazard analysis, and system validation have been
completed and provided to the trained operator before implementation of the Model 5100E instrument.
Manual Part Number: Revision Level: C File Name: MN-A-0008 Page 5-8
C5-06-4900-08-0 ECO 8029