Appendixb - Specifications - Bacharach Neutronics 5100E Operation Manual

Appendices
5.2 Appendix B - Specifications
OXYGEN SENSOR
DISPLAY
SIGNAL INTERFACE
RELAY OUTPUTS
The manufacturer reserves the right to amend these specifications as necessary.
Manual Part Number:
C5-06-4900-08-0
External Compact Zirconium Oxide
0.75" 7-segment LED digital display, 4 characters
Displays oxygen from 0 to 100 percent.
Resolution: 0.00–0.99 %
1.00–9.99 %
10.0–99.9 %
100.0 %
Color -Coded LED's for system status:
RUN: Green
FAULT: Yellow
ALARM-1: Red
ALARM-2: Red
Serial Service Port:
Analog Voltage Output:
Analog Current Output:
Range ID Voltage:
Alarm-1:
Field Adjustable Form C (SPDT) Voltage-free, 5A @ 250
VAC, 5A @ 30 VDC. Configurable to fail-safe/non fail-
safe and ascending/descending action
Alarm-2: Field Adjustable Form C (SPDT) Voltage-free, 5A @ 250
VAC, 5A @ 30 VDC. Configurable to fail-safe/non fail-
safe and ascending/descending action
Fault: Non-adjustable Form B (SPST) Voltage-free, 5A @ 250
VAC, 5A @ 30 VDC, Fail Safe action, non-configurable.
Revision Level: C
ECO 8029
X.XX
X.XX
XX.X
XXX.X
Bi-directional RS-232
0–1, 0–5, or 0–10 VDC
Non-isolated 4 – 20 mA, 12 VDC, negative
ground, powered by analyzer, maximum
electrical load 250 Ohms
0 %–1 % 5.63 VDC + 0.1VDC
0 %–10 % 6.25 VDC + 0.1VDC
0 %–25 % 6.88 VDC + 0.1VDC
0 %–50 % 7.50 VDC + 0.1VDC
0 %–100 % 8.13 VDC + 0.1VDC
File Name: MN-A-0008 Page 5-2