Programming With Mikroprog Programmer - mikroElektronika CLICKER 2 PIC32MZ Manual

3.2 Programming with mikroProg
programmer
The microcontroller can be
programmed with external
mikroProg for PIC, dsPIC, and
PIC32 programmer and mikroProg
Suite for PIC32MZ software. The
external programmer is connected
to the development system via 2x5
connector Figure 3-9. mikroProg
is a fast USB 2.0 programmer with
hardware debugger support.
It supports all PIC, dsPIC, and PIC32
devices in a single programmer.
Outstanding performance, easy
operation and elegant design are its
key features.
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
Figure 3-8:
mikroProg connector
Page 13