Programming With Mikroprog Programmer - mikroElektronika CLICKER 2 Manual

3.2 Programming with mikroProg programmer

The microcontroller can be programmed with external mikroProg
for PIC programmer and mikroProg Suite for PIC software.
The external programmer is connected to the development
system via 1x5 connector Figure 3-9. mikroProg is a fast USB
2.0 programmer with hardware debugger support. It supports
PIC10®, dsPIC30/33®, PIC24® and PIC32® devices in a single
programmer. It supports over 570 microcontrollers
from Microchip®. Outstanding performance,
easy operation and elegant design are its key
features.
You can also
program it
with ICD2®
or ICD3® if
you reroute
the wires like
shown here.
ICD2/3
programmer
clicker 2 for
dsPIC33 1x5
programming
headers
Figure 3-9: mikroProg connector
Page 14