Introduction To Clicker 2 For Pic32Mz - mikroElektronika CLICKER 2 PIC32MZ Manual

Introduction to Clicker 2 for PIC32MZ

Clicker 2 for PIC32MZ is a compact development
kit with two mikroBUS
connectivity. You can use it to quickly build
your own gadgets with unique functionalities
and features. It carries the PIC32MZ 32-bit
microcontroller, two indication LEDs, two general
purpose buttons, a reset button, an ON/OFF
switch, a li-polymer battery connector, a micro
USB connector and two mikroBUS
A mikroProg connector and a 2x26 pinout for
interfacing with external electronics are also
provided. The mikroBUS
two 1x8 female headers with SPI, I 2C, UART, RST,
PWM, Analog and Interrupt lines as well as 3.3V, 5V
and GND power lines. clicker 2 for PIC32MZ board
can be powered over a USB cable.
Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from
sockets for click board
TM TM
sockets.
TM
connector consists of
TM
power supply
via USB cable (5V DC)
board dimensions
60.4 x 81 mm (2.4 x 3.2 inch)
weight
48 g (0.105 lbs)
Page 4