Advertisement
User manual
Please follow the instructions step by step:
3.1)
The top packaging level contains all accessoires. Please take out the three black flat pads.
Place these flat pads on your hifi-rack or another suitable base, where the final position of your
Reference Jubilee
turntable will be.
3.2)
Remove the entire upper packaging level from the box.
Reference Jubilee
Take out the
previously positioned flat pads.
Pic. 4:
Reference Jubilee
3.3)
To avoid hum noises we recommend to ground the bearing.
To do so, attach the grounding wire supplied to the bearing cap with the screw provided.
Reference Jubilee
Pic. 5: Grounding the
3.4)
Remove the protective security tape from the bearing housing.
Place two drops of the synthetic bearing oil on the ceramic bearing shaft (also available at
www.analogshop.de, Art. No. AC068).
Pic. 6: Oiling the bearing shaft
Page 8
turntable body and place its pre-assembled feet (spikes) on the
delivery condition
© clearaudio electronic GmbH, 2021-04
Advertisement
Need help?
Do you have a question about the Reference Jubilee and is the answer not in the manual?