Clearaudio concept User Manual
Hide thumbs Also See for concept:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

clearaudio
concept
User manual
Bedienungsanleitung
Pic. similar /
Abb. ähnlich
© clearaudio electronic GmbH
Made in Germany

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for Clearaudio concept

  • Page 1 User manual Bedienungsanleitung Pic. similar / Abb. ähnlich © clearaudio electronic GmbH Made in Germany...
  • Page 2 All parameters have been pre-adjusted at the Clearaudio factory, including the tracking and anti-skating force. Please read the instruction manual for easy setup and to discover how to care for your concept turntable to enjoy music for many years. Follow the instructions carefully to avoid any potential damage.
  • Page 3 5. Maintenance Never use agressive cleaning detergent. Do not use dry cloths for cleaning as this generates static electricity. Suitable cleaning and care products from Clearaudio are available from www.analogshop.de or from specialist retailers. The bearing of the turntable platter can be lubricated every 2 years with the oil provided.
  • Page 4  Clearaudio assumes no liability for any damage that may occur due to incorrect packing. 9. Disposal Do not dispose this product together with other waste.
  • Page 5: Table Of Contents

    User manual / Bedienungsanleitung Contents 1. Packaging overview ...............6 2. List of component ..............6 3. Set-up ...................7 - 8 4. Important notes..............9 - 10 5. Troubleshooting ..............11 - 12 6. Technical data ................13 Warranty information ..............26 - 27 Made in Germany Page / Seite 5...
  • Page 6: Packaging Overview

    Please retain the original packaging for any future transportation and shipping. concept Please see the list below to check the contents of your Clearaudio tunrtable. First layer: concept...
  • Page 7: Set-Up

    Setting up the turntable is easy. The turntable chassis, tonearm and cartridge are already assembled and all key parameters have been pre-adjusted and tested at the Clearaudio factory. concept turntable needs a set-up space of at least 17 x 14 inches.
  • Page 8 (red plug = right channel, black plug = left channel). Pic. 8: Power supply of the turntable concept Your turntable is now completely assembled and ready to play. concept Clearaudio is wishing you a lot of pleasure with your new turntable. © clearaudio electronic GmbH Page / Seite 8...
  • Page 9: Important Notes

    Pic. 9: Adjustment of the tonearm height Clearaudio assumes no liability for incorrect handling or any damage caused if non-qualified persons attempt these adjustments. 4.3 Adjustment of the anti-skating force...
  • Page 10 There is no need to check the speed before using the turntable for the first time as the motor adjustment is already pre-set at the factory. We recommend the Clearaudio Stroboscope Testrecord (Art. No. AC038) and the Clearaudio “Speed Light” (Art. No. AC039, both available at www.analogshop.de) to adjust the speed as perfectly and precisely as possible.
  • Page 11: Troubleshooting

    Check the stylus and have the cartridge checked by a specialist if necessary. Is the record or the stylus dirty or Clean the record / or the cartridge. Clearaudio damaged? offers many helpful accessories for care and cleaning. In the event of damage, we recommend an assessment by a specialist and, if necessary, an exchange.
  • Page 12 User manual / Bedienungsanleitung Is the record or the stylus dirty Clean the record / or the cartridge. Clearaudio or damaged? offers many helpful accessories for care and cleaning. In the event of damage, we recommend an assessment by a specialist and, if necessary, Needle bounces an exchange.
  • Page 13: Technical Data

    Aluminium-magnesium alloy with ceramic surface layer Manufacturer‘s warranty: 2 years* 2 years* * Provided that the warranty card is correctly completed and returned to Clearaudio, or your product is registered online at https://clearaudio.de/en/service/registration.php, within 14 days of purchase. Made in Germany Page / Seite 13...
  • Page 14 Abdeckhaube für Plattenspieler (Art. Nr. AC120) concept clamp (Art. Nr. AC122) concept Ersatzriemen für Plattenspieler (Art. Nr. AC123) Diese und viele andere Zubehörartikel finden Sie im clearaudio Onlineshop (www.analogshop.de) oder über Ihrem Fachhändler. © clearaudio electronic GmbH Page / Seite 14...
  • Page 15 Der Plattenspieler besitzt keine automatische Endabschaltung. Sobald die Auslaufrille erreicht ist, muss der Tonarm mittels Handlift von der der Platte gehoben und der Plattenspieler manuell abgeschaltet werden. Nicht für Kinder geeignet! Lieferumfang kann verschluckbare Kleinteile enthalten. 2. Bestimmungsgemäßer Gebrauch concept ist ein Plattenspieler, zur Wiedergabe von Schallplatten. concept Der bestimmungsgemäße Gebrauch des Laufwerks ist die Verwendung in Übereinstimmung mit den in der...
  • Page 16 Seite nach oben in die untere Verpackungsebene eingepackt wird und dass die Laufwerksfüße wieder zurück geschraubt werden!  Clearaudio kann für Schäden, die beim Transport entstehen und die durch falsches Einpacken verursacht wurden, keine Haftung übernehmen. 9. Entsorgung Dieses Produkt darf nicht zusammen mit Restmüll entsorgt werden.
  • Page 17 User manual / Bedienungsanleitung Inhaltssverzeichnis 1. Verpackungsübersicht ............18 2. Lieferumfang ................18 3. Aufbau und Inbetriebnahme ..........19 - 20 4. Wichtige Informationen ............21 - 22 5. Fehlerbehebung ..............23 - 24 6. Technische Daten ..............25 Garantie Informationen ............26 - 27 Made in Germany Page / Seite 17...
  • Page 18: Verpackungsübersicht

    User manual / Bedienungsanleitung 1. Verpackungsübersicht Clearaudio hat eine spezielle Verpackung für Ihr concept Laufwerk entwickelt, welche einen sicheren Transport gewährleistet. Bitte heben Sie diese Verpackung für eventuelle Transporte auf. Obere Verpackungsebene: concept Laufwerkskörper mit integrierter Motoreinheit, Tonarm und Tonabnehmer...
  • Page 19: Aufbau Und Inbetriebnahme

    Der Aufbau und die Inbetriebnahme des Plattenspielers gestalten sich sehr einfach, da das Laufwerk, der Tonarm sowie der Tonabnehmer schon werksseitg vormontiert, eingestellt und im Hause clearaudio getestet wurden. concept Plattenspieler benötigt eine waagerechte Aufstellfläche von mindestens 420 x 350 mm.
  • Page 20 Phonovorstufe (roter Stecker = rechter Kanal, schwarzer Stecker = linker Kanal). Abb. 8: Netzadapter des Laufwerks Ihr clearaudio concept Plattenspieler ist nun komplett aufgebaut und spielbereit! Clearaudio wünscht Ihnen viel Freude beim Musikhören! © clearaudio electronic GmbH Page / Seite 20...
  • Page 21: Wichtige Informationen

    Ihr Händler hat die Möglichkeit die Tonarmhöhe an der seitlich integrierten Schraube in der Tonarmbasis anzupassen. Abb. 9: Einstellung der Tonarmhöhe Clearaudio übernimmt keine Haftung für Schäden, die durch persönliches Handhaben entstehen. Bitte wenden sie sich immer an Ihren Fachhandel! 4.3 Einstellung des Anti-Skating concept...
  • Page 22 - Trimmer links = Einstellung 78 U/min - Trimmer mitte = Einstellung 45 U/min - Trimmer rechts = Einstellung 33 1/3 U/min (in der Nähe des Netzanschlusses) Abb. 11: Platzierung der Trimmer © clearaudio electronic GmbH Page / Seite 22...
  • Page 23: Fehlerbehebung

    Tonabnehmer ggfs. einem Spezialisten überprüfen. Ist die Schallplatte oder der Reinigen Schallplatte bzw. Nadelträger verschmutzt oder Tonabnehmer. Clearaudio bietet viele hilfreiche beschädigt? Zubehörprodukte zur Pflege und Reinigung an. Bei Beschädigung empfehlen wir eine Begutachtung durch einen Spezialisten ggfs. einen Austausch.
  • Page 24 User manual / Bedienungsanleitung Ist die Schallplatte oder der Reinigen Schallplatte bzw. Nadelträger verschmutzt oder Tonabnehmer. Clearaudio bietet viele hilfreiche beschädigt? Zubehörprodukte zur Pflege und Reinigung an. Bei Beschädigung empfehlen wir eine Begutachtung durch einen Spezialisten ggfs. einen Austausch. Nadel hüpft oder Ist eine zu hohe Auflagekraft Justieren Sie die Auflagekraft.
  • Page 25: Technische Daten

    Kupfer Systemkörper: Aluminium Aluminium-Magnesium Legierung mit keramischer Beschichtung Herstellergarantie: 2 Jahre* 2 Jahre* * Nur bei korrekt ausgefüllter und eingesandter Garantiekarte an clearaudio oder online registrierter Garantie innerhalb von 14 Tagen (https://clearaudio.de/de/service/ registration.php). Made in Germany Page / Seite 25...
  • Page 26: Warranty Information

    2 years. To receive this full Clearaudio warranty, you The full, extended warranty period for the must either complete and return the relevant section of the warranty registration card to Clearaudio, or register your product online at https://clearaudio.de/en/service/registration.php, within 14 days of purchase.
  • Page 27 ESPAÑOL GARANTIA Para obtener información acerca de la garantia póngase en contacto con su distribuidor Clearaudio. GUARDE SU RECIBO DE COMPRA Su recibo de compra es su prueba permanente de haber adquirido un aparato de valor, Este recibo deberá guardarlo en un lugar seguro y utilizarlo como referencia cuando tenga que hacer uso del seguro o se ponga en contacto con Clearaudio.
  • Page 28 Handmade in Germany Clearaudio Electronic accepts no liability for any misprints. Technical specifications are subject to change or improvement without prior notice. Product availability is as long as stock lasts. Copies and reprints of this document, including extracts, require written consent from Clearaudio Electronic GmbH, Germany.

Table of Contents