Download
Share
Print this page
Clearaudio Ovation User Manual
  1. Manuals
  2. Brands
  3. Clearaudio Manuals
  4. Turntable
  5. Ovation
  6. User manual

Clearaudio Ovation User Manual

Clearaudio electronic ovation turntable user manual
Hide thumbs Also See for Ovation:

Advertisement

Quick Links

See also: User Manual
Ovation
User manual
Made in Germany
clearaudio electronic
Hi-Fi Components
GmbH
Spardorfer Str. 150
D-91054 Erlangen
Tel. +49(0) 9131/59595
FAX +49(0) 9131/51683
www.clearaudio.de
www.analogshop.de
info@clearaudio.de /clearaudio copyright  2011
Version-1.3_11-11-10_E

Advertisement

loading
Need help?

Need help?

Do you have a question about the Ovation and is the answer not in the manual?

Questions and answers

Related Manuals for Clearaudio Ovation

Summary of Contents for Clearaudio Ovation

  • Page 1 Ovation User manual Made in Germany clearaudio electronic Hi-Fi Components GmbH Spardorfer Str. 150 D-91054 Erlangen Tel. +49(0) 9131/59595 FAX +49(0) 9131/51683 www.clearaudio.de www.analogshop.de info@clearaudio.de /clearaudio copyright  2011 Version-1.3_11-11-10_E...
  • Page 2 Recording and reproduction of any material may require the consent of the creator. Please acknowledge the information given in the Copyright Act 1956, Dramatic and Musical Performers Act 1958, Performers Protection Acts 1963 and 1972, any more recent legal regulations. Page 2  clearaudio electronic GmbH 2011...

  • Page 3: Table Of Contents

    Ovation User manual User manual 4 – 14 Contents 1. Packaging overview 2. Set-up and operation 3. Service 4. Special directions 5. Technical data Warranty information Page 3  clearaudio electronic GmbH 2011...

  • Page 4: User Manual

    (Quality and warranty card, bearing oil) If ordered as set: tonearm and/or phono cartridge 2. Layer (middle): Turntable - chassis 3. Layer (bottom): Platter, aluminium sub-platter Page 4  clearaudio electronic GmbH 2011...

  • Page 5: Set-Up And Operation

    Please follow the description step by step: Ovation requires a space of at least 16.54 inch x 13.78 inch for positioning. 13.78 inch / 350 mm 16.54 inch / 420 mm Pic. 1: Setting up space Page 5  clearaudio electronic GmbH 2011...
  • Page 6 Pic. 2: chassis Please remove the protective seal from the bearing shaft and place two drops of the synthetic bearing oil (also available at: www.analogshop.de) on the ceramic bearing shaft. Pic. 3: Bearing oil Page 6  clearaudio electronic GmbH 2011...
  • Page 7 This is normal, as the CMB requires the weight of the platter to fully engage it. Pic. 5: Seating the sub-platter Pic. 5.1: Installing the belt Page 7  clearaudio electronic GmbH 2011...
  • Page 8 Please also make sure they align exactly as shown in picture below. Pic. 7 a: Alignment of sub-platter and bearing Pic. 7: Seating the platter on to the bearing markings Page 8  clearaudio electronic GmbH 2011...
  • Page 9 Screw to tighten Position and the tonearm cable cover Fitting for tonearm shaft Fitting for tonearm cable Pic. 9: Backview of the tonearm Page 9  clearaudio electronic GmbH 2011...

  • Page 10: Fine Speed Adjustment

    For the correct adjustment of the speed please put the delivered clearaudio Stroboscope Testrecord on the platter. Follow the instruction of the Stroboscope Testrecord user manual. To check the speed with highest accuracy please use the clearaudio Speed Light (AC039) (available under: www.analogshop.de). Page 10  clearaudio electronic GmbH 2011...
  • Page 11 If the motor still has speed variations please contact your nearest authorized clearaudio dealer or the clearaudio factory direct. Now you are ready to play your vinyl records. Ovation We wish you a lot of pleasure with your new - turntable. Page 11  clearaudio electronic GmbH 2011...

  • Page 12: Service

    Any further questions you may have about this turntable should be directed to the distributor or directly to clearaudio at clearaudio electronic GmbH Spardorfer Str. 150 91054 Erlangen Germany Tel/Phone: +49-(0)9131/59595 Fax: +49-(0)9131/51683 www.clearaudio.de www.analogshop.de info@clearaudio.de Page 12  clearaudio electronic GmbH 2011...

  • Page 13: Special Directions

    If any transportation of the - turntable should be necessary, always remove the turntable platter, otherwise serious damage can occur! The bearing hole needs to be covered to prevent any dust from entering the bearing. Page 13  clearaudio electronic GmbH 2011...

  • Page 14: Technical Data

    Clearaudio electronic is not responsible for typographical errors in descriptions. Technical specifications subject to change or improvement without prior notice. Availability as long as stock lasts. Copies and reprints- also only in extracts – require written confirmation from clearaudio electronic GmbH; Germany  clearaudio electronic GmbH 2011...

  • Page 15: Warranty Information

    IMPORTANTE Cuando solicite el servicio otorgado por la garantia el usuario tiene la responsabilidad de demonstrar cuándo efectuó la compra. En este caso, su recibo de compra será la prueba apropiada. Page 15  clearaudio electronic GmbH 2011...