3D Systems Cube User Manual page 14

2. When prompted, loosen the lock screw that is indicated on the touchscreen display.
Select the checkmark
NOTE: Use a 1.5 mm Allen wrench that is included with the printer.
NOTE: The lock screw (1) is located just below the adjustment knob (2). The
lock screw for adjustment knob B can be accessed from the front of the
printer. The lock screw for adjustment knob A can be accessed from behind
the printer.
3. Follow the instructions on the touchscreen display. Once the adjustments have been
made, select the
to continue.
checkmark to continue.