➢ For PPPoE, enter PPPoE account ID and password so that GVC3212 can get IP address from the
PPPoE server.
Notes:
•
Press OK button on IPV4 Address Type to choose either DHCP, Static IP or PPPoE.
•
Press Right arrow navigation key to open the sidebar and press on save to save the current settings.
•
Press on Back key to cancel the configuration change.
2. Using IPv6:
To configure the GVC3212 using IPv6 protocol, follow the below steps:
1. Plug the Ethernet cable into the LAN port on the back of the GVC3212
2. Go to LCD menu ➔ Settings ➔ Network ➔ Ethernet ➔ IPv6 Address Type.
3. Tap "Address Type" to select DHCP or Static IP as the address type.
➢ For DHCP, save the setting and GVC3212 should be able to get IP address from the DHCP server
in the network.
➢ For static IP, configure IPv6 address, DNS server 1, DNS server 2 and Preferred DNS server, enter
the IPv6 address in the format of 2001:db8:1:2::3.
Figure 20: IPv4 Settings - PPPoE
Figure 21: IPv6 Settings - DHCP
GVC3212 User Guide
Version 1.0.0.9
P a g e
|
29