Using The Remote Control - Grandstream Networks GVC3212 User Manual

Send/Answer a call
End Call
Backspace
Navigation Keys:
Up/Down/Left/Right/OK
Power On/Off
Back
Volume Down
Volume Up
Zoom In
Zoom Out

Using the Remote Control

GVC3212 remote control is connected to GVC3212 via infrared connection. Before using the remote control,
please make sure that 2x AAA batteries are correctly installed on the back of the remote control.
Infrared signals are automatically used to connect the remote control to GVC3212. Users need to
keep the two devices in front of each other without any substantial obstruction in between. The connected
remote control's LED will light up in green whenever the user presses a key.
If the remote control fails to connect to GVC3212, please follow the steps below to troubleshoot:
• Check the battery polarity when placed into the battery case. Make sure the batteries are placed in the
correct direction in the remote control.
• Check the battery power.
•
Access call screen and enter phone number then
press the key to dial out.
•
Press the key to redial the last outgoing call.
Hang up the conference.
Press the key to delete input characters.

Press Navigation keys to select options.

Press Ok button to confirm/access a setting.
LCD prompt shows the following three options after pressing
this key:

Sleep

Power Off

Reboot
When the power button is pressed second time, the pop-up
window will be closed.
Press the key to go back to the previous screen or exit the
current screen.
Turn down the device volume.
Turn up the device volume.
Zoom in screen.
Zoom out screen or adjust distant focus.
GVC3212 User Guide
Version 1.0.0.9
P a g e | 20