Figure 33: One Click Debugging - Grandstream Networks GVC3212 User Manual

Hd video conferencing device

Hide thumbs Also See for GVC3212:

Table of Contents

Configure the server path for the config file server. The default setting is "fm.ipvideotalk.com/gvc3212".

Notes:

•

Press Right arrow navigation key to open the sidebar and press on save to save the current settings.

•

Press on Back key to cancel the configuration change.

2. One click debugging:

Users can start debugging and capturing device logs for troubleshooting purposes on this section, all

captured files will be saved on an external USB storage. Pressing on Start button will initiate debugging.

Users can stop Debugging by pressing on Stop button, once debugging is stopped, users could then eject

the USB device to check the files.

3. State Detection:

State detection page provides visual information about the device's interfaces connection, Network and

Accounts status. Users can also perform an Audio detection test to check if the built-in speaker is working:

Figure 38: One Click Debugging

GVC3212 User Guide

Version 1.0.0.9

P a g e

Table of Contents