Application For Configuring Scanner Operations (Web Config) - Epson DS-730 User Manual

Scanner Basics
>
Information on Applications
Starting on Windows
❏ Windows 10
Click the start button, and then select Epson Software > EPSON Software Updater.
❏ Windows 8.1/Windows 8
Enter the application name in the search charm, and then select the displayed icon.
❏ Windows 7
Click the start button, and then select All Programs > Epson Software > EPSON Software Updater.
Starting on Mac OS
Select Go > Applications > Epson Software > EPSON Software Updater.

Application for Configuring Scanner Operations (Web Config)

Web Config is an application that runs in a web browser, such as Internet Explorer and Safari, on a computer or
smart device. You can confirm the scanner status or change the network service and scanner settings. To use the
Web Config, connect the scanner and the computer or device to the same network.
The following browsers are supported.
Microsoft Edge, Internet Explorer 8 or later, Firefox
* Use the latest version.
Running Web Config on a Web Browser
1. Check the scanner's IP address.
Select Settings > Network Status > IP Address on the scanner's control panel to confirm the scanner's IP
address.
2. Launch a Web browser from a computer or smart device, and then enter the scanner's IP address.
Format:
IPv4: http://the scanner's IP address/
IPv6: http://[the scanner's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
❏ Since the scanner uses a self-signed certificate when accessing HTTPS, a warning is displayed on the browser when
you start Web Config; this does not indicate a problem and can be safely ignored.
❏ If the administrator password has not been set when accessing Web Config, you need to set a user name and
password.
Important:
c
Do not forget the user name and the password. If you forget them, you will need to contact Epson service
support.
>
Application for Configuring Scanner Operations (Web Config)
* * *
, Chrome , Safari
23