The Original Jams In The Scanner Frequently; Paper Protection Does Not Work Correctly; The Originals Get Dirty - Epson DS-730 User Manual

Solving Problems
Important:
c
Make sure there is no paper inside the scanner.
5. Close the scanner cover.
Related Information
"Multiple Originals Are Fed (Double Feed)" on page 194
&
"Paper Protection Does not Work Correctly" on page 196
&

The Original Jams in the Scanner Frequently

If the original jams in the scanner frequently, try the following.
❏ Select Slow on the control panel to slow down the scanning speed.
Select Settings from the home screen > Scanner Settings > Slow, and then set it to On.
❏ Clean the rollers inside the scanner.
❏ If the ejected originals get stuck in the output tray, store the output tray and do not use it.
Related Information
"Cleaning Inside the Scanner" on page 172
&
"Multiple Originals Are Fed (Double Feed)" on page 194
&
"Paper Protection Does not Work Correctly" on page 196
&

Paper Protection Does not Work Correctly

Depending on the original and the level you set, this feature may not work correctly.
❏ Select Off to disable the feature when scanning plastic cards or thick paper.
❏ When misdetection occurs frequently, lower the level of this feature.
❏ If your original is damaged, check that this feature is enabled. If it is already enabled, increase the level of
protection for the feature.
Related Information
"Scanner Settings" on page 167
&
"Removing Jammed Originals from the Scanner" on page 194
&

The Originals Get Dirty

Clean the inside of the scanner.
Related Information
"Cleaning Inside the Scanner" on page 172
&
>
Paper Feeding Problems
>
The Originals Get Dirty
196