Re-Setting The Network Connection; When Changing The Computer; Changing The Connection Method To The Computer - Epson DS-730 User Manual

Adding or Replacing the Computer or Devices

Re-setting the Network Connection

This section explains how to make the network connection settings and change the connection method when
replacing the computer.

When Changing the Computer

When changing the computer, make connection settings between the computer and the scanner.
Making Settings for Connecting to the Computer
We recommend using the installer to connect the scanner to a computer. You can run the installer using one of the
following methods.
❏ Setting up from the website
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
http://epson.sn
❏ Setting up using the software disc (only for the models that come with a software disc and users with Windows
computers with disc drives.)
Insert the software disc into the computer, and then follow the on-screen instructions.
Follow the on-screen instructions.

Changing the Connection Method to the Computer

This section explains how to change the connection method when the computer and the scanner have been
connected.
Changing from USB to a Network Connection
Using the installer and re-set up in a different connection method.
❏ Setting up from the website
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
http://epson.sn
❏ Setting up using the software disc (only for the models that come with a software disc and users with Windows
computers with disc drives.)
Insert the software disc into the computer, and then follow the on-screen instructions.
Selecting Change the Connection Methods
Follow the on-screen instructions. On the Select Your Operation screen, select Set up Scanner connection again
(for new network router or changing USB to network, etc.) , and then click Next.
Select Connect via wired LAN (Ethernet), and then click Next.
Follow the on-screen instructions to finish setup.
>
Re-setting the Network Connection
206
> ...
Changing t