Epson DS-730 User Manual page 222

Administrator Information
Controlling protocols
Configure the protocol settings supported by the scanner.
1. Access Web Config and then select the Network Security tab > Protocol.
2. Configure each item.
3. Click Next.
4. Click OK.
The settings are applied to the scanner.
Related Information
"Running Web Config on a Web Browser" on page 23
&
Protocols you can Enable or Disable
Protocol
Bonjour Settings
SLP Settings
WSD Settings
LLTD Settings
LLMNR Settings
SNMPv1/v2c Settings
SNMPv3 Settings
Protocol Setting Items
Bonjour Settings
Items
Use Bonjour
Bonjour Name
Bonjour Service Name
Location
>
Advanced Security Settings
Description
You can specify whether to use Bonjour. Bonjour is used to search for devices, scan, and so on.
You can enable or disable the SLP function. SLP is used for push scanning and network
searching in EpsonNet Config.
You can enable or disable the WSD function. When this is enabled, you can add WSD devices,
and scan from the WSD port.
You can enable or disable the LLTD function. When this is enabled, it is displayed on the
Windows network map.
You can enable or disable the LLMNR function. When this is enabled, you can use name
resolution without NetBIOS even if you cannot use DNS.
You can specify whether or not to enable SNMPv1/v2c. This is used to set up devices,
monitoring, and so on.
You can specify whether or not to enable SNMPv3. This is used to set up encrypted devices,
monitoring, etc.
>
Controlling Using Protocols
Setting value and Description
Select this to search for or use devices through Bonjour.
Displays the Bonjour name.
Displays the Bonjour service name.
Displays the Bonjour location name.
222