Mail Server Setting Items; Checking A Mail Server Connection - Epson DS-730 User Manual

Preparing to Scan over a Network

Mail Server Setting Items

Items
Authentication Method
Authenticated Account
Authenticated Password
Sender's Email Address
SMTP Server Address
SMTP Server Port Number
Secure Connection
Certificate Validation
POP3 Server Address
POP3 Server Port Number

Checking a Mail Server Connection

You can check the connection to the mail server by performing the connection check.
1. Access Web Config and select the Network tab > Email Server > Connection Test.
2. Select Start.
The connection test to the mail server is started. After the test, the check report is displayed.
>
Configuring a Mail Server
Specify the authentication method for the scanner to access the mail server.
Off
SMTP AUTH
POP before SMTP
If you select SMTP AUTH or POP before SMTP as the Authentication Method, enter the
authenticated account name between 0 and 255 characters in ASCII (0x20-0x7E).
If you select SMTP AUTH or POP before SMTP as the Authentication Method, enter the
authenticated password between 0 and 20 characters in ASCII (0x20-0x7E).
Enter the sender's email address. Enter between 0 and 255 characters in ASCII (0x20-0x7E)
except for : ( ) < > [ ] ; ¥. A period ". " cannot be the first character.
Enter between 0 and 255 characters using A-Z a-z 0-9 . - . You can use IPv4 or FQDN format.
Enter a number between 1 and 65535.
Specify the secure connection method for the email server.
None
SSL/TLS
STARTTLS
The certificate is validated when this is enabled. We recommend this is set to Enable.
If you select POP before SMTP as the Authentication Method, enter the POP3 server
address between 0 and 255 characters using A-Z a-z 0-9 . - . You can use IPv4 or FQDN
format.
If you select POP before SMTP as the Authentication Method, enter a number between 1
and 65535.
>
Checking a Mail Server Connection
Settings and Explanation
Authentication is disabled when communicating with a mail
server.
Requires that a mail server supports SMTP Authentication.
Configure the POP3 server when selecting this method.
If you select POP before SMTP in Authentication Method,
the connection method is set to None.
This is available when Authentication Method is set to Off
or SMTP AUTH.
This is available when Authentication Method is set to Off
or SMTP AUTH.
63