Scanning Using Wsd - Epson DS-730 User Manual

Basic Scanning
>
Scanning Using the Scanner's Control Panel
5. Press the OK button to view the job settings.
6. Check the job settings.
You can scroll the screen using the
If you want to edit the scan settings, press the OK button. Select the item using the
edit the setting using
Note:
If you set Disable job setting changes on control panel in Document Capture Pro/Document Capture, you cannot
change the settings.
7. Press the
x
button to start scanning.
Related Information
"Setting a Job" on page 115
&
"Enabling a Job to Run from the Control Panel (Button Assignment)" on page 122
&

Scanning Using WSD

Note:
❏ This feature is only available for computers running Windows 10/Windows 8.1/Windows 8.
❏ If you are using Windows 7, you need to setup your computer in advance using this feature.
1. Place the originals.
2. On the scanner's control panel, select WSD using the
3. Select the computer to which you want to save the scanned images.
4. Press the
x
button.
Setting Up a WSD Port
This section explains how to set up a WSD port for Windows 7.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
The following conditions must be met to set up a WSD port.
❏ The scanner and the computer are connected to the network.
❏ The scanner driver is installed on the computer.
1. Turn the scanner on.
2. Click the start button on the computer, and then click Network.
u d
or button.
l r
or button. When you have finished editing the job, press the OK button.
>
Scanning Using WSD
l r
or button, and then press the OK button.
94
u d
or button, and then