Epson DS-730 User Manual page 230

Administrator Information
Configuring Basic SSL/TLS Settings
If the scanner supports the HTTPS server feature, you can use an SSL/TLS communication to encrypt
communications. You can configure and manage the scanner using Web Config while ensuring security.
Configure encryption strength and redirect feature.
1. Access Web Config and select the Network Security tab > SSL/TLS > Basic.
2. Select a value for each item.
❏ Encryption Strength
Select the level of encryption strength.
❏ Redirect HTTP to HTTPS
Redirect to HTTPS when HTTP is accessed.
3. Click Next.
A confirmation message is displayed.
4. Click OK.
The scanner is updated.
Related Information
"Running Web Config on a Web Browser" on page 23
&
Configuring a Server Certificate for the Scanner
1. Access Web Config and select the Network Security tab > SSL/TLS > Certificate.
2. Specify a certificate to use on Server Certificate.
❏ Self-signed Certificate
A self-signed certificate has been generated by the scanner. If you do not obtain a CA-signed certificate,
select this.
❏ CA-signed Certificate
If you obtain and import a CA-signed certificate in advance, you can specify this.
3. Click Next.
A confirmation message is displayed.
4. Click OK.
The scanner is updated.
Related Information
"Running Web Config on a Web Browser" on page 23
&
"Configuring a CA-signed Certificate" on page 225
&
"Configuring a CA Certificate" on page 229
&
>
Advanced Security Settings
230
>
SSL/TLS Communication with the Scanner