Using Document Capture Pro Server; Setting Server Mode - Epson DS-730 User Manual

Preparing to Scan over a Network
4. Click Device Configuration on the Home tab on the ribbon menu.
When the administrator password has been set, enter the password and click OK.
5. Click Common > Contacts.
6. Click Browse on Import.
7. Select the file you want to import and then click Open.
When you select the binary file, in Password enter the password you set when exporting the file.
8. Click Import.
The confirmation screen is displayed.
9. Click OK.
The validation result is displayed.
❏ Edit the information read
Click when you want to edit the information individually.
❏ Read more file
Click when you want to import multiple files.
10. Click Import, and then click OK on the import completion screen.
Return to the device's property screen.
11. Click Transmit.
12. Click OK on the confirmation message.
The settings are sent to the scanner.
13. On the sending completion screen, click OK.
The scanner's information is updated.
Open the contacts from Web Config or scanner's control panel, and then check that the contact is updated.

Using Document Capture Pro Server

By using Document Capture Pro Server, you can manage the sorting method, saving format, and forwarding
destination of a scanning result executed from the scanner's control panel. You can call and execute a job
previously registered on the server from the scanner's control panel.
Install it on the server computer.
For more information on Document Capture Pro Server, contact your local Epson office.

Setting Server Mode

To use Document Capture Pro Server, set up as follows.
>

Using Document Capture Pro Server

86
>
Setting Server Mode