Mixture Of Originals - Epson DS-730 User Manual

Specifications of Originals and Placing Originals
4. Slide the edge guides to fit the edge of the envelopes making sure there are no gaps between the envelopes and
the edge guides. Otherwise, the envelopes may be fed skewed.
Note:
❏ We recommend selecting the appropriate rotation angle or Auto as the Rotate setting in the application.
❏ To scan envelopes, set the appropriate setting in the Epson Scan 2 window.
When you are using Document Capture Pro, you can open the window by pressing the Detailed Settings button on
the Scan Settings screen.
Select Main Settings tab > Detect Double Feed > Off. See the Epson Scan 2 help for details.
If Detect Double Feed is enabled in the Epson Scan 2 window and a double feed error occurs, remove the envelope
from the ADF, reload it, press the
on the control panel to set it to On. This disables Detect Double Feed for the next scan, and you can scan again. The
DFDS Function only disables Detect Double Feed for one sheet.
Related Information
"Required Settings for Special Originals in Epson Scan 2 Window" on page 112
&

Mixture of Originals

Specifications of Originals that are a Mixture of Different Sizes
You can load a mixture of originals from 50.8×50.8 mm (2.0×2.0 in.) to A4 (or Letter) size. You can also load a
mixture of paper types or thickness.
Important:
c
❏ When placing and scanning originals that are a mixture of different sizes, originals may be fed askew because
not all of the originals are supported by edge guides.
❏ Originals may be jammed or fed askew if you set different types or very different sizes of originals, such as in the
following cases.
· Thin paper and Thick paper
· A4 size paper and card size paper
If originals are fed askew, check whether or not the scanned image is available.
d
button, and then select DFDS Function (Double Feed Detection Skip function)
57
> >
Placing Originals Mixture of Originals