Raven SmarTrax system Supplement Installation Manual page 12

For ford nh 9280 w/o high flow

Hide thumbs Also See for SmarTrax system:

Ford NH 9280 W/O High Flow SmarTrax Supplement & Installation Manual

1 0

Tee on tank return manifold (below pressure priority valve)

Tank Port Hose

Remove the existing tank to orbital hose at the return oil manifold and attach a

provided #16 JIC tee fitting to the manifold. Re-connect the hose to the tee fitting.

Install a #16 to #12 adapter fitting to the tee. Connect one end of the Tank hose to

this fitting and the other end to the T-port on the Steering Assist Valve.

(214-1000-210)

Note:

It is important to trace the hoses so that the pressure and

tank hoses are not accidentally swapped for each other. This

will cause valve failure. If the Left and Right Steer hoses are

swapped, the machine will steer opposite to the desired direc-

tion..

Excess Flow Hose

Right Steer Hose

Left Steer Hose

Tank Hose